DOD Inkjet Printer

SQ/2 Scorpion Drop on Demand Large Character

Printing System

Product Description

The SQ/2 Scorpion industrial large character ink jet printer includes upgraded software delivering more features. SQ/2 Scorpion users have the option of choosing from several  print head  configurations. Five different print head sizes are available, offering 12 print sizes ranging in height from 3/8″ up to 1 3/4″. The 1600 Series print heads offer split-line capability and the option of printing full-size characters or half-size characters with the same print head.

True Versatility for Your Needs

SQ/2 Scorpion users have the option of choosing from several printhead configurations. Five different print sizes are available: 3/8”, 1/2”, 3/4”, 1” or 1-3/4” character height. All printheads are capable of printing at 100% or 70% character height, offering 12 print sizes ranging from 1/4” to 1-3/4” in height. The 1” and 1-3/4” (1600 Series) printheads even offer split-line capability and the option of printing full-size characters or half-size characters with the same printhead.

More Brain. More Brawn.

The SQ/2 Scorpion is upgraded with software features that ink jet users need most: increased memory locations for up to 128 messages, the ability to automatically print a manufacturing date and an expiration date, as well as a shift organizer to automatically separate and code different work shifts within your packaging operation. The SQ/2 Scorpion also comes standard with a shaft encoder input for packagers using a variable speed conveyer. On the hardware side, the SQ/2 Scorpion features a built-in central air gauge to view regulated air pressure within the system and fine-tune your print quality.

BENEFITS OF THE SQ/2 SCORPION

• Upgraded features include increased message locations, expiration date, shift organizer and encoder input
• Built-in air gauge to view regulated air pressure within the system and fine-tune print quality
• Proven plunger technology ensures uptime and keeps maintenance costs to a minimum
• Two models: water-based for porous surfaces or solvent-based for non-porous surfaces
• Ability to run two SQ/2 Series print heads or one 1600 Series print head
• Component modularity eliminates the need for service calls and minimizes downtime; print heads and components can be replaced in less than 5 minutes

OPTIONAL ACCESSORIES

• Spare Parts Kit  – Includes spare printhead, card cage and PC board pack, air pump module, data cable and master cap
• Starter Kit  – Includes ink, cleaner for flushing the system, spray bottle for cleaner, hand cleaner and wipes for the printhead

SYSTEM SPECIFICATIONS

• Printer Type  – Large character ink jet printing system
• Printhead Options  – Users have the option to use up to two SQ/2 printheads, or one 1600 Series printhead
• Character Heights  – SQ/2 Series Printheads (7-channel dot matrix characters) .75” (1.9cm) in 7 x 5 matrix; .5” (1.3cm) in 5 x 5 matrix, or .5” (1.3cm) in 7 x 5 matrix; .375” (1.0cm) in 5 x 5 matrix, or .375” (1.0cm) in 7 x 5 matrix; .25” (.6cm) in 5 x 5 matrix Character Heights – 1600 Series Printheads (16-channel dot matrix characters) 1.75” (4.5cm) in 16 x 10 matrix, with split-line capability to print two lines of the following size characters: .75” (1.9cm) at 7 x 5 matrix; .5” (1.3cm) in 5 x 5 matrix, or 1.0” (2.5cm) in 16 x 10 matrix, with split-line capability to print two lines of the following size characters: .375” (1.0cm) at 7 x 5 matrix; .25” (.6cm) in 5 x 5 matrix
• Character Set  – 61 character ASCII set Print Speed – Up to 200 feet/minute (61m/minute) line speed
• Message Length  – 128 character length per message; 128 memory locations
• Communication  – RS-232C, 9600 baud, 8 data bits, 1 start, 1 stop, Asynch
• Software Features  – Counter, lot counter, 24-hour clock, 8 or 12 hour programmable shift code, Julian date, 3-letter month name, 3-letter weekday name, expiration date, expiration month, expiration day, expiration year, expiration & Julian date
• Operating Features  – Dot size, print delay, character width, photocell on/off/repeat, invert print, reverse print, purge routine
• Shaft Encoder Output  – Resident software allows communication with shaft encoder for use with variable speed conveyors
• Controller Dimensions  – 12” (31cm) H x 12” (31cm) W x 5.25” (13cm) D
• Controller Weight  -10.5 lbs. (4.8kg)
• Printhead Dimensions  – SQ/2 Series Printheads: 3” (7.6cm) H x 1.6” (4.1cm) W x 7” (17.8cm) L 1600 Series Printheads: 2.5” (6.4cm) H x 1.5” (3.8cm) W x 7” (17.8cm) L Dimensions are for the printhead only – an additional 3” (7.6cm) is needed for the ink line and printhead cabling which extends from the back of the printhead
• Product Sensor  – Diffuse beam photocell (24v) or hardware sinking signal
• Communication Interface  – Two RS-232 ports for connection to input device, host PC, and PLC for input from scale, scanner or external alarm
• Air Pump  – Internal air pump module provides necessary air pressure; external air not recommended
• Electrical Requirements  – 90-120 VAC, 50/60Hz, 4.0 amp
• Cabinet Construction  – Industrial gauge coated steel
• Operating Environment  – Water-Based Ink: 32ºF (0ºC) to 120ºF (50ºC) Solvent-Based Ink: 0ºF (-18ºC) to 120ºF (50ºC)
• Substrate Capabilities  – Porous or Non-Porous surfaces
• Ink Capabilities  – Porous: Squid Ink SQ-60 no-clog ink Non-Porous: Several Squid Ink solvent based fluids to meet your application needs for adhesion and dry time
• Ink Volume  – .5 gallon (1.9 liters) bottle standard; available upgrade (water-base ink only) to 5.0 gallon (18.9 liters) pail